TRANSMITTER BATTERY (w/ Smart Entry and Start System) REPLACEMENT

for Type A:

1. 

   Push the release hook knob and extract the mechanical key.

2. 

   Text in Illustration

   *a	Protective Tape

   Insert a precision screwdriver into the gap, and turn the screwdriver to detach the transmitter housing cover.

   Tech Tips

   Tape the screwdriver tip before use.

3. 

   Insert a precision screwdriver into the gap and gently remove the battery.

   Note

   
   

   • Do not push the terminals with your finger.

   • Do not forcibly pry up the battery. The terminals may be damaged.

   • Do not touch the battery with wet hands. Water may cause rust.

   • Do not touch or move any components inside the transmitter. It may interfere with proper operation.

   • When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the electrical transmitter from being damaged.

     Tech Tips

     Tape the screwdriver tip before use.

for Type A:

1. 

   Install a new battery with the positive (+) side facing upward, as shown in the illustration.

   Note

   
   

   • Do not bend the transmitter battery electrode during insertion.

   • Keep the transmitter cover interior free of dust and oil.

   • When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the electrical transmitter from being damaged.

2. 

   Install the transmitter housing cover by pressing down on it as shown in the illustration.

3. 

   Insert the mechanical key into the transmitter.

4. Press one of the transmitter switches and check that the LED illuminates.

   OK
   Transmitter LED illuminates when switch is pressed.