POWER DOOR LOCK CONTROL SYSTEM DATA LIST / ACTIVE TEST


  1. DATA LIST

    Tech Tips

    Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.

    Note

    In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.


    1. Connect the GTS to the DLC3.

    2. Turn the ignition switch to ON.

    3. Turn the GTS on.

    4. Enter the following menus: Body Electrical / Main Body or Master Switch / Data List.

    5. Read the Data List according to the display on the GTS.

      Main Body (Main Body ECU (Driver Side Junction Block Assembly))
      Tester Display Measurement Item/Range Normal Condition Diagnostic Note
      D Door Courtesy SW Driver door courtesy light switch signal/ON or OFF

      ON: Driver door open

      OFF: Driver door closed

      		 -
      P Door Courtesy SW Front passenger door courtesy light switch signal/ON or OFF

      ON: Front passenger door open

      OFF: Front passenger door closed

      		 -
      RR Door Courtesy SW Rear right door courtesy light switch signal/ON or OFF

      ON: Rear right door open

      OFF: Rear right door closed

      		 -
      RL Door Courtesy SW Rear left door courtesy light switch signal/ON or OFF

      ON: Rear left door open

      OFF: Rear left door closed

      		 -
      Back Door Courtesy SW Back door courtesy light switch signal/ON or OFF

      ON: Back door open

      OFF: Back door closed

      		 -
      D-Door Lock Pos SW Driver door lock position switch signal/ON or OFF

      ON: Driver door unlocked

      OFF: Driver door locked

      		 -
      P-Door Lock Pos SW Front passenger door lock position switch signal/ON or OFF

      ON: Front passenger door unlocked

      OFF: Front passenger door locked

      		 -
      Door Lock SW-Lock Front passenger side door control switch signal/ON or OFF

      ON: Front passenger side door control switch pushed to lock position

      OFF: Front passenger side door control switch not pushed to lock position

      		 -
      Door Lock SW-Unlock Front passenger side door control switch signal/ON or OFF

      ON: Front passenger side door control switch pushed to unlock position

      OFF: Front passenger side door control switch not pushed to unlock position

      		 -
      Door Key SW-Lock Driver door key linked lock switch signal/ON or OFF

      ON: Driver door key cylinder turned to lock position

      OFF: Driver door key cylinder turned to unlock position

      		 -
      D Door Key SW-UL Driver door key linked unlock switch signal/ON or OFF

      ON: Driver door key cylinder turned to unlock position

      OFF: Driver door key cylinder turned to lock position

      		 -
      Back Door Open Handle SW Back door opener switch signal/ON or OFF

      ON: Back door opener switch pushed

      OFF: Back door opener switch not pushed

      		 -
      RR-Door Lock Pos SW Rear door RH lock position switch signal/ON or OFF

      ON: Rear door RH unlocked

      OFF: Rear door RH locked

      		 -
      RL-Door Lock Pos SW Rear door LH lock position switch signal/ON or OFF

      ON: Rear door LH unlocked

      OFF: Rear door LH locked

      		 -
      Back Door Open Permit/Prohibit

      Permit: Back door open available

      Prohibit: Back door open unavailable

      		 -
      Unlock Key Twice Key-linked 2-step unlock function/ON or OFF Customized value displayed -
      Auto Lock Speed-sensitive automatic door lock function/ON or OFF Customized value displayed -
      Auto Lock/Shift Shift-linked automatic door lock function/ON or OFF Customized value displayed -
      Auto Unlock/Shift Shift-linked automatic door unlock function/ON or OFF Customized value displayed -
      All Unlock/Open-Close Driver door-linked automatic door unlock function/ON or OFF Customized value displayed -
      Master Switch (Power Window Regulator Master Switch Assembly)
      Tester Display Measurement Item/Range Normal Condition Diagnostic Note
      Door Lock Switch Status Driver side door control switch lock signal/ON or OFF

      ON: Driver side door control switch pushed to lock position

      OFF: Driver side door control switch not pushed to lock position

      		 -
      Door Unlock Switch Status Driver side door control switch unlock signal/ON or OFF

      ON: Driver side door control switch pushed to unlock position

      OFF: Driver side door control switch not pushed to unlock position

      		 -

  2. ACTIVE TEST

    Tech Tips

    Using the GTS to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.


    1. Connect the GTS to the DLC3.

    2. Turn the ignition switch to ON.

    3. Turn the GTS on.

    4. Enter the following menus: Body Electrical / Main Body / Active Test.

    5. Perform the Active Test according to the display on the GTS.

      Main Body (Main Body ECU (Driver Side Junction Block Assembly))
      Tester Display Test Part Control Range Diagnostic Note
      Door Lock Door lock motor Lock/Unlock/OFF -