POWER DOOR LOCK CONTROL SYSTEM PRECAUTION

Note

When disconnecting the cable from the negative (-) battery terminal, initialize the following systems after the cable is reconnected.

System Name See Procedure
Back Door Closer System

Click here

Power Back Door System

  1. EXPRESSION OF IGNITION SWITCH


    1. The type of ignition switch used on this model differs according to the specifications of the vehicle.

      The expressions listed in the table below are used in this section.

      Switch Type Ignition Switch (Position) Engine Switch (Condition)
      Expression Ignition switch off LOCK Off
      Ignition switch ON ON On (IG)
      Ignition switch ACC ACC On (ACC)
      Engine Start START Start

  2. PRECAUTION WHEN USING GTS


    1. When using the GTS to troubleshoot the power door lock control system:

      Connect the GTS to the DLC3 while the ignition switch is off, and turn a door courtesy light switch on and off at 1.5-second intervals until communication between the GTS and vehicle begins.