POWER DOOR LOCK CONTROL SYSTEM CUSTOMIZE PARAMETERS


  1. CUSTOMIZING FUNCTION WITH GTS

    Tech Tips

    The following items can be customized.

    Note


    • When the customer requests a change in a function, first make sure that the function can be customized.

    • Be sure to make a note of the current settings before customizing.

    • When troubleshooting a function, first make sure that the function is set to the default setting.


    1. Connect the GTS to the DLC3.

    2. Turn the ignition switch to ON.

    3. Turn the GTS on.

    4. Enter the following menus: Customize Setting / Door Lock or Illuminated Entry.

    5. Select the setting by referring to the table below.

      Door Lock
      Tester Display Default Content Setting
      Unlock Key Twice OFF Function that unlocks only the driver side door when the driver side door key cylinder is turned to unlock once, and unlock all doors when it is turned to unlock twice. For the OFF setting, turning it once unlocks all doors. ON or OFF
      Auto Lock ON Function that locks all doors when the vehicle speed reaches a certain level. ON or OFF
      Auto Lock/Shift OFF Function that locks all doors when the shift lever is moved from P to any position other than P when the engine is running and all doors are closed. ON or OFF
      Auto Unlock/Shift OFF Function that unlocks all doors when the shift lever is moved to P from any position other than P while the ignition switch is ON. ON or OFF
      All Unlock/Open-Close OFF Function that unlocks the other doors when the driver side door is opened within 10 seconds after the ignition switch is turned to off. ON or OFF
      Illuminated Entry
      Display Default Content Setting
      Lighting Time 15 s Function that changes the lighting time after closing all doors. (It will quickly fade out in case of turning the ignition switch from off to ACC or ON.) 7.5 s, 15 s or 30 s