LIN COMMUNICATION SYSTEM PRECAUTION

Note

When disconnecting the cable from the negative (-) battery terminal, initialize the following systems after the cable is reconnected.

System Name See Procedure
Back Door Closer System

Click here

Power Back Door System

  1. PRECAUTIONS WHEN USING GTS


    1. When using the GTS to troubleshoot with the ignition switch off:

      Connect the GTS to the DLC3, and turn the courtesy light switch on and off at 1.5-second intervals until communication between the GTS and vehicle begins.

    2. After all DTCs are cleared, check if the trouble occurs again 6 seconds after the ignition switch is turned to ON.

  2. PRECAUTIONS WHEN WORKING ON STEERING LOCK SYSTEM


    1. After replacing the steering lock ECU (steering lock actuator assembly), perform the key ID code registration.

    2. After replacing the steering lock ECU (steering lock actuator assembly), confirm the lock/unlock operation of the steering lock.

      Operation Confirmation
      Steering Lock Condition Operation Condition
      Lock With the ignition switch off, open and close any door.
      Unlock Turn the ignition switch from off to ON or ACC.