GENERATOR REPLACEMENT


  1. REPLACE GENERATOR DRIVE END FRAME BEARING


    1. A01EMMV

      Remove the 4 screws and bearing retainer.

    2. A01EJKKE01

      Using SST and a hammer, tap out the bearing.

      SST
      09950-60010   ( 09951-00250 )
      09950-70010   ( 09951-07100 )
    3. A01ELTUE01

      Using SST and a press, press in a new bearing.

      SST
      09950-60010   ( 09951-00520 )
      09950-70010   ( 09951-07100 )
    4. A01EKDOE01
      Text in Illustration
      *1 Tab
      *2 Cutout

      Fit the tabs on the bearing retainer into the cutouts on the drive end frame to install the bearing retainer.

    5. Install the 4 screws.

      Torque:
      2.3 N*m  { 23 kgf*cm, 20 in.*lbf }