CHARGING SYSTEM Noise Occurs from Generator while Engine is Running

INSPECTION PROCEDURE

PROCEDURE

1. CHECK LOOSENESS OF V-RIBBED BELT

   
   

   1. Check the tension of the belt by pushing it down with your finger.

      OK
      The tension of the belt is enough.

   
   

   NG

   REPLACE V-RIBBED BELT TENSIONER ASSEMBLY Click here

   OK

2. CHECK V-RIBBED BELT FOR WEAR

   
   

   1. Check the V-ribbed belt for wear.

      OK
      The V-ribbed belt is not worn.

   
   

   NG

   REPLACE V-RIBBED BELT Click here

   OK

3. CHECK CLUTCH PULLEY FOR WEAR

   
   

   1. Check the clutch pulley groove for wear or other defects.

      OK
      The clutch pulley groove is not damaged.

   
   

   NG

   REPLACE CLUTCH PULLEY Click here

   OK

4. CHECK NOISE WHILE CLUTCH PULLEY IS OPERATING

   
   

   1. Perform a driving test and check if noise occurs when decelerating.

      OK
      Noise does not occur.

   
   

   NG

   REPLACE CLUTCH PULLEY Click here

   OK

   REPLACE GENERATOR ASSEMBLY Click here