CHARGING SYSTEM Charge Warning Light Comes ON while Driving

INSPECTION PROCEDURE

PROCEDURE


  1. CHECK LOCK FUNCTION OF CLUTCH PULLEY


    1. Check the lock function with the pulley installed in the vehicle.


      1. Visually check that the rotor in the generator operates with the engine started.

    2. Check the lock function with the pulley removed from the vehicle.


      1. Remove the generator pulley cap.

      2. A01EL5CE02
        Text in Illustration
        *1 Free
        *2 Lock

        Hold the generator rotor using SST, and turn the clutch pulley clockwise to check that the outer ring locks Click here.

        OK
        The outer ring locks.
      SST
      09820-63021

    NG

    REPLACE CLUTCH PULLEY Click here

    OK

  2. CHECK LOCK OF CLUTCH PULLEY


    1. Start the engine and visually check for looseness of the clutch pulley.

      OK
      The clutch pulley is not loose.

    NG

    TIGHTEN CLUTCH PULLEY TO THE SPECIFIED TORQUE

    OK

    REPLACE GENERATOR ASSEMBLY Click here