REAR VIEW MONITOR SYSTEM PROBLEM SYMPTOMS TABLE

Note

Depending on the parts that are replaced during vehicle inspection or maintenance, performing initialization, registration or calibration may be needed. Refer to Precaution for Navigation System (for Navigation Receiver Type) Click here.

Tech Tips

Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.
Inspect the fuses and relays related to this system before inspecting the suspected areas below.
To confirm the operation condition of this system, refer to Operation Explanation (System Description) Click here.

Rear View Monitor System (for Navigation Receiver Type)
Symptom	Suspected Area	See page
When the shift lever is in R, an image of the area behind the vehicle is not displayed (screen is not black)	CAN communication system	Click here
	Proceed to "Navigation Receiver Assembly Power Source Circuit"	Click here
	Navigation receiver assembly	Click here
When the shift lever is in R, an image of the area behind the vehicle is not displayed (screen is black)	Proceed to "Image from Camera for Rear View Monitor is Abnormal"	Click here
	Navigation receiver assembly	Click here
When the shift lever is not in R, an image of the area behind the vehicle is displayed	CAN communication system	Click here
	Navigation receiver assembly	Click here
Image from the camera for the rear view monitor is abnormal (color, distorted image)	Proceed to "Image from Camera for Rear View Monitor is Abnormal"	Click here
	Navigation receiver assembly	Click here
When an image of the area behind the vehicle is displayed, the lines are misaligned (the image from the camera is tilted)	Check that the camera is correctly installed	Click here
Guide lines are not displayed	Rear television camera assembly	Click here

Rear View Monitor System (for Radio and Display Type)
Symptom	Suspected Area	See page
When the shift lever is in R, an image of the area behind the vehicle is not displayed (screen is not black)	CAN communication system	Click here
	Proceed to "Radio Receiver Power Source Circuit"*1	Click here
	Proceed to "Radio Receiver Power Source Circuit"*2	Click here
	Radio and display receiver assembly	Click here
When the shift lever is in R, an image of the area behind the vehicle is not displayed (screen is black)	Proceed to "Image from Camera for Rear View Monitor is Abnormal"	Click here
	Radio and display receiver assembly	Click here
When the shift lever is not in R, an image of the area behind the vehicle is displayed	CAN communication system	Click here
	Radio and display receiver assembly	Click here
Image from the camera for the rear view monitor is abnormal (color, distorted image)	Proceed to "Image from Camera for Rear View Monitor is Abnormal"	Click here
	Radio and display receiver assembly	Click here
When an image of the area behind the vehicle is displayed, the lines are misaligned (the image from the camera is tilted)	Check that the camera is correctly installed	Click here
Guide lines are not displayed	Rear television camera assembly	Click here

*1: w/ Navigation System
*2: w/o Navigation System