NAVIGATION SYSTEM (for Navigation Receiver Type) Disc cannot be Ejected

INSPECTION PROCEDURE

Note

Depending on the parts that are replaced during vehicle inspection or maintenance, performing initialization, registration or calibration may be needed. Refer to Precaution for Navigation System Click here.

PROCEDURE


  1. CHECK OPERATION


    1. Press the disc eject switch of the navigation receiver assembly for 5 seconds or more and check that the disc is ejected.

      Tech Tips

      When the disc eject switch is pressed and held for 8 seconds or more, navigation system will be restart.

      OK
      Disc is ejected.

    NG

    REPLACE NAVIGATION RECEIVER ASSEMBLY Click here

    OK

  2. REPLACE DISC AND RECHECK


    1. Replace the disc with a known good one and check that the malfunction disappears.

      OK
      Disc is ejected.

    NG

    REPLACE NAVIGATION RECEIVER ASSEMBLY Click here

    OK

    END (DISC WAS FAULTY)