NAVIGATION SYSTEM (for Navigation Receiver Type) CD/DVD Sound Skips

INSPECTION PROCEDURE

Note

Depending on the parts that are replaced during vehicle inspection or maintenance, performing initialization, registration or calibration may be needed. Refer to Precaution for Navigation System Click here.

PROCEDURE


  1. CHECK DISC


    1. A01EKEB

      Check that the disc is not deformed or cracked.

      OK
      No deformation or cracks on the disc

    NG

    END (DISC IS FAULTY)

    OK

  2. CHECK DISC


    1. A01EKSZ

      Check the disc.

      OK
      The disc is clean.

      Note

      Do not use a conventional record cleaner or anti-static preservative.

      Tech Tips

      If dirt is on the disc surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction.


    NG

    CLEAN DISC

    OK

  3. REPLACE DISC AND RECHECK


    1. Replace the disc with a known good one and check that the malfunction disappears.

      OK
      Malfunction disappears.

    NG

    CHECK NAVIGATION RECEIVER ASSEMBLY Click here

    OK

    END (DISC WAS FAULTY)

  4. CHECK NAVIGATION RECEIVER ASSEMBLY


    1. Check the navigation receiver assembly installation condition.


      1. Check that the navigation receiver assembly is properly installed.

        OK
        Navigation receiver assembly is properly installed.

    NG

    REINSTALL NAVIGATION RECEIVER ASSEMBLY

    OK

    REPLACE NAVIGATION RECEIVER ASSEMBLY Click here