PRECAUTION FOR DISCONNECTING CABLE FROM NEGATIVE BATTERY TERMINAL
Note
When disconnecting the cable from the negative (-) battery terminal, initialize the following systems after the cable is reconnected.
| System Name | See Procedure |
|---|---|
| Power Back Door System | |
| Back Door Closer System |
IGNITION SWITCH EXPRESSIONS
The type of ignition switch used on this model differs depending on the specifications of the vehicle. The expressions listed in the table below are used in this section.
| Expression | Ignition Switch (Position) |
Engine Switch (Condition) |
|---|---|---|
| Ignition Switch off | LOCK | Off (Lock) |
| Ignition Switch ACC | ACC | On (ACC) |
| Ignition Switch ON | ON | On (IG) |
| Engine Start | START | On (Start) |
PRECAUTIONS FOR G-BOOK
If replacing any of the following parts, refer to Initialization of Repair Instruction Click here.
Navigation receiver assembly
On this model, the navigation receiver assembly functions as the G-BOOK device and has the G-BOOK ID.
Necessary data for the G-BOOK system is stored in the navigation receiver assembly.
Depending on the content of troubleshooting, G-BOOK.com may need to be accessed. It is necessary to explain to the customer that communication fees may be incurred due to access to online services when checking during repair. Make sure to obtain the consent of the customer before proceeding with work.
IN THE FOLLOWING SITUATIONS, IT IS NOT POSSIBLE TO CONNECT TO THE G-BOOK SERVICE
"Bluetooth" connection is interrupted.
"Bluetooth" connection setting has not been performed.
Services that limit receiving/making a call, such as drive mode, dial lock, call prohibition, voice mail or select call are used.
The cellular phone cannot be used due to non-payment of the cellular phone, etc.
A cellular phone that cannot access the internet is being used.