NAVIGATION SYSTEM (for Navigation Receiver Type) PRECAUTION


  1. IGNITION SWITCH EXPRESSIONS


    1. The type of ignition switch used on this model differs depending on the specifications of the vehicles. The expressions listed in the table below are used in this section.

      Expression Ignition Switch (Position) Engine Switch (Condition)
      Ignition Switch off LOCK Off (Lock)
      Ignition Switch ACC ACC On (ACC)
      Ignition Switch ON ON On (IG)
      Engine Start START On (Start)

  2. PRECAUTION FOR DISCONNECTING CABLE FROM NEGATIVE BATTERY TERMINAL

    Note


    • After the ignition switch is turned off, the navigation receiver assembly records various types of memory and settings. As a result, after turning the ignition switch off, make sure to wait at least 60 seconds before disconnecting the cable from the negative (-) battery terminal.

    • When disconnecting the cable from the negative (-) battery terminal, initialize the following systems after the terminal is reconnected.

      System Name See Procedure
      Back Door Closer System

      Click here

      Power Back Door System

  3. PRECAUTION FOR NAVIGATION SYSTEM


    1. If replacing the navigation receiver assembly, refer to Initialization of Repair Instruction Click here.

  4. PRECAUTIONS FOR G-BOOK


    1. The navigation receiver assembly functions as the G-BOOK device and holds the G-BOOK ID.

      Note

      When replacing the navigation receiver assembly, perform vehicle contract setting Click here.