REAR DOOR SPEAKER INSTALLATION


  1. INSTALL REAR NO. 2 SPEAKER ASSEMBLY (for 13 Speakers)


    1. A01EKQC

      Install the rear No. 2 speaker assembly with the 2 screws.

    2. Engage the clamp.

  2. INSTALL REAR SPEAKER BRACKET (for 13 Speakers)


    1. A01EMIU

      Install the rear speaker bracket and rear door speaker grille sub-assembly with the 8 screws.

  3. INSTALL REAR SPEAKER ASSEMBLY


    1. A01EITW

      Install the rear speaker assembly with the 3 bolts.

    2. Connect the connector.

  4. INSTALL REAR DOOR INNER GLASS WEATHERSTRIP


    1. A01EJTA

      Engage the 7 claws and install the rear door inner glass weatherstrip to the rear door trim board sub-assembly as shown in the illustration.

  5. INSTALL REAR DOOR TRIM BOARD SUB-ASSEMBLY


    1. for 13 Speakers:


      1. Connect the connector.

    2. A01EL1B

      Engage the 8 clips and install the rear door trim board sub-assembly.

    3. Install the 2 screws.

  6. INSTALL REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH REAR DOOR ARMREST BASE PANEL


    1. Connect the connector.

    2. A01EKM2

      Engage the 2 clips and 5 claws, and install the rear power window regulator switch assembly with rear door armrest base panel.

  7. INSTALL REAR DOOR INSIDE HANDLE BEZEL PLUG


    1. A01EM4J

      Engage the 3 claws and install the rear door inside handle bezel plug.

  8. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.