FRONT DOOR SPEAKER REMOVAL


  1. REMOVE FRONT DOOR INSIDE HANDLE BEZEL PLUG


    1. A01EK9L

      Using a moulding remover, disengage the 3 claws and remove the front door inside handle bezel plug.

  2. REMOVE POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Driver Side)


    1. A01EIR0

      Using a moulding remover, disengage the 2 clips and 4 claws.

    2. Disconnect the connector and remove the power window regulator master switch assembly with front door armrest base panel.

  3. REMOVE POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Front Passenger Side)


    1. A01EIOQ

      Using a moulding remover, disengage the 2 clips and 4 claws.

    2. Disconnect the connector and remove the power window regulator switch assembly with front door armrest base panel.

  4. REMOVE COURTESY LIGHT ASSEMBLY


    1. A01EIV1E01
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver wrapped with protective tape, disengage the claw.

    2. Disconnect the connector and remove the courtesy light assembly.

  5. REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY


    1. A01EMLF

      Remove the 2 screws.

    2. Using a clip remover, disengage the 10 clips.

    3. Pull out the front door trim board sub-assembly in the direction indicated by the arrow as shown in the illustration.

    4. Raise the front door trim board sub-assembly and remove the front door trim board sub-assembly together with the front door inner glass weatherstrip.

    5. A01EKW8

      Disengage the 2 claws and disconnect the front door inside handle sub-assembly.

  6. REMOVE FRONT NO. 1 SPEAKER ASSEMBLY


    1. A01EJVO

      Disconnect the connector.

    2. Remove the 4 bolts and the front No. 1 speaker assembly.