RADIO ANTENNA CORD REMOVAL


  1. REMOVE INSTRUMENT PANEL SAFETY PAD ASSEMBLY

    Click here

  2. REMOVE ANTENNA CORD SUB-ASSEMBLY


    1. Disengage the 7 clamps and remove the antenna cord sub-assembly.

      A01EMM5
  3. REMOVE ROOF HEADLINING ASSEMBLY

    Click here

  4. REMOVE NO. 2 ANTENNA CORD SUB-ASSEMBLY


    1. Peel up the strips of tape so that the washer hose and No. 2 antenna cord sub-assembly can be removed.

      A01EJ2SE01
      Text in Illustration
      A01EKJB Tape A01EMIT Front

      Tech Tips

      Tape is not available as a supply part. Try to leave as much tape as possible on the roof headlining so that the tape can be reused.

    2. Remove the washer hose and No. 2 antenna cord sub-assembly from the roof headlining assembly.

  5. REMOVE UPPER BACK WINDOW PANEL TRIM


    1. A01EJO5

      Disengage the 4 clips and 4 claws, and remove the upper back window panel trim.

  6. REMOVE BACK DOOR TRIM PANEL ASSEMBLY


    1. A01EJ5Z

      Disengage the 16 clips and remove the back door panel trim assembly.

  7. REMOVE BACK DOOR TRIM COVER LH (w/o Power Back Door)


    1. A01EL78

      Disengage the 2 clips and remove the back door trim cover LH.

  8. REMOVE BACK DOOR TRIM COVER LH (w/ Power Back Door)


    1. A01EJ6V

      Disengage the 2 clips and remove the back door trim cover LH.

  9. REMOVE BACK DOOR TRIM COVER RH


    1. A01EKBY

      Disengage the 2 clips and remove the back door trim cover RH.

  10. REMOVE NO. 3 ANTENNA CORD SUB-ASSEMBLY


    1. A01EKSC

      Disconnect the 2 connectors.

    2. Disengage the 4 hooks and disconnect the washer hose.

      A01ELN4E01
    3. Disengage the 7 clamps.

      Text in Illustration
      *1 Clamp *2 Hook
      *3 Washer Hose - -
    4. A01EJE1

      Disconnect the connector and disengage the clamp.

    5. Disengage the 4 clamps.

      A01EIPKE01
      Text in Illustration
      *1 Clamp *2 Grommet
    6. Disconnect the grommet from the back door.

    7. Disengage the 2 claws.

    8. A01ELWX

      Remove the No. 3 antenna cord sub-assembly with the washer hose as shown in the illustration.