STEERING LOCK SYSTEM PRECAUTION


  1. PRECAUTION FOR DISCONNECTING THE BATTERY CABLE

    Note

    When disconnecting the cable from the negative (-) battery terminal, initialize the following system(s) after the cable is reconnected:

    System See Procedure
    Back Door Closer System

    Click here

    Power Back Door System

    Click here

  2. PRECAUTIONS WHEN WORKING ON STEERING LOCK SYSTEM


    1. After replacing the steering lock ECU (steering lock actuator assembly), perform the key ID code registration.

    2. After replacing the steering lock ECU (steering lock actuator assembly), confirm the lock/unlock operation of the steering lock.

      Operation Confirmation
      Steering Lock Condition Operation Condition
      Lock With the ignition switch off, open and close any door.
      Unlock Turn the ignition switch from off to ON or ACC.