PARKING BRAKE SWITCH REMOVAL


  1. REMOVE FRONT SEAT ASSEMBLY LH

    Click here

  2. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY


    1. A01EJVQE01

      Pull the upper console panel sub-assembly in the direction indicated by the arrow to disengage the 6 clips.

    2. Disconnect the connectors and remove the upper console panel sub-assembly.

  3. REMOVE NO. 2 CONSOLE BOX CARPET


    1. A01EKN6

      Remove the No. 2 console box carpet.

  4. REMOVE CONSOLE BOX ASSEMBLY


    1. A01EKRE

      Remove the 2 bolts.

    2. A01EKCR

      Remove the screw and 2 clips.

    3. A01EJXQ

      Disengage the 2 claws.

    4. Disconnect the connectors and remove the console box assembly.

  5. REMOVE AIR CONDITIONING CONTROL ASSEMBLY


    1. A01EK00

      Remove the screw.

    2. A01ELRWE01
      Text in Illustration
      *1 Protective Tape

      Apply protective tape to the area shown in the illustration.

    3. Using a moulding remover, disengage the 2 clips and 4 guides as shown in the illustration.

    4. Disconnect the connector and remove the air conditioning control assembly.

  6. REMOVE FRONT DOOR SCUFF PLATE LH


    1. A01ELE9

      Disengage the 3 clips, 7 claws and guide, and remove the front door scuff plate LH.

  7. REMOVE COWL SIDE TRIM SUB-ASSEMBLY LH


    1. A01EJEA

      Remove the clip.

    2. Disengage the 2 clips and remove the cowl side trim sub-assembly LH.

  8. REMOVE LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL


    1. A01EKDA

      Remove the bolt <C> and screw <E> or <F>.

    2. Disengage the claw and 9 clips.

    3. Disconnect the connectors.

    4. A01EITG

      Disconnect the connector and aspirator duct.

    5. A01EJS4

      Disconnect the hood lock control cable and remove the lower No. 1 instrument panel finish panel.

  9. REMOVE FRONT DOOR SCUFF PLATE RH

    Tech Tips

    Use the same procedure as for the LH side Click here.

  10. REMOVE COWL SIDE TRIM SUB-ASSEMBLY RH

    Tech Tips

    Use the same procedure as for the LH side Click here.

  11. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY


    1. A01EMCD

      Push the 3 claws in the direction indicated by the arrow to disengage them.

    2. Disengage the guide and remove the No. 2 instrument panel under cover sub-assembly.

  12. REMOVE LOWER INSTRUMENT PANEL SUB-ASSEMBLY


    1. A01EJR6

      Remove the bolt <C> and 4 screws <E> or <F>.

    2. A01EIMR

      Disengage the claw, 3 clips and 5 guides.

    3. Disconnect the connectors and remove the lower instrument panel sub-assembly.

  13. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY


    1. A01EK0N

      Turn the shift lever knob counterclockwise and remove the shift lever knob sub-assembly.

  14. REMOVE POSITION INDICATOR HOUSING ASSEMBLY


    1. Move the shift lever to N.

    2. A01ELXD

      Disconnect the connector.

    3. Disengage the 3 clips and remove the position indicator housing assembly.

  15. REMOVE CONSOLE BOX SUB-ASSEMBLY


    1. A01EK7A

      Remove the 2 screws <E> or <F>.

    2. Using a clip remover, remove the clip.

    3. Disconnect the connector.

    4. Disengage the 2 clamps.

    5. A01ELB3

      Disengage the 2 claws and 4 clips and remove the console box sub-assembly.

  16. SEPARATE PARKING BRAKE PEDAL ASSEMBLY


    1. Turn back the floor carpet.

    2. Remove the bolt and nut, and separate the No. 1 parking brake cable assembly from the body.

      A01ELPY
    3. A01EKVX

      Disconnect the parking brake switch connector.

    4. A01EJMC

      Remove the 3 nuts and separate the parking brake pedal assembly from the body.

  17. REMOVE PARKING BRAKE SWITCH ASSEMBLY


    1. A01ELUL

      Remove the screw and parking brake switch assembly.