PARKING BRAKE PEDAL REMOVAL


  1. REMOVE YAW RATE AND ACCELERATION SENSOR

    Tech Tips

    Refer to the instructions for Removal of the yaw rate and acceleration sensor Click here.

  2. REMOVE REAR NO. 2 AIR DUCT


    1. Turn back the floor carpet.

    2. A01ELSO

      Disengage the 4 claws and remove the rear No. 2 air duct as shown in the illustration.

  3. REMOVE REAR NO. 1 AIR DUCT


    1. A01EJA3

      Disengage the 2 claws and remove the rear No. 1 air duct.

  4. REMOVE FRONT NO. 2 FLOOR SILENCER


    1. A01EJVV

      Remove the front No. 2 floor silencer.

  5. LOOSEN PARKING BRAKE


    1. A01EIPWE01
      Text in Illustration
      *1 No. 1 wire adjusting nut
      *2 Lock nut

      Remove the lock nut and No. 1 wire adjusting nut to completely loosen the parking brake.

  6. DISCONNECT NO. 4 PARKING BRAKE CABLE ASSEMBLY


    1. A01EK25E01
      Text in Illustration
      *1 Hold
      *2 Turn

      Holding the lock nut of the No. 1 parking brake cable assembly, loosen the turnbuckle of the No. 4 parking brake cable assembly to disconnect the No. 4 parking brake cable assembly from the No. 1 parking brake cable assembly.

  7. REMOVE PARKING BRAKE PEDAL ASSEMBLY


    1. A01ELXF

      Disconnect the 2 connectors.

    2. A01EM0I

      Disengage the 4 clamps and separate the wire harness.

    3. Remove the nut and 4 bolts, and separate the No. 1 parking brake cable assembly from the body.

      A01EKIF
    4. A01EKVX

      Disconnect the parking brake switch connector.

    5. A01EJMC

      Remove the 3 nuts and parking brake pedal assembly.