RELAY ON-VEHICLE INSPECTION


  1. REMOVE STOP LIGHT CONTROL (BRK) RELAY


    1. Remove the stop light control (BRK) relay.

    2. A01EKUCE04
      Text in Illustration
      *1 Stop Light Control (BRK) Relay

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      3 - 4 Voltage is not applied between terminals 1 and 2 Below 1 Ω
      3 - 5 Voltage is not applied between terminals 1 and 2 10 kΩ or higher
      3 - 4 Voltage is applied between terminals 1 and 2 10 kΩ or higher
      3 - 5 Voltage is applied between terminals 1 and 2 Below 1 Ω