PARKING BRAKE SWITCH INSPECTION


  1. INSPECT PARKING BRAKE SWITCH ASSEMBLY


    1. A01EMF0E02

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Condition Switch Condition Specified Condition
      1 - Body ground

      Parking brake switch on

      (Switch pin released)

      		 Below 1 Ω
      1 - Body ground

      Parking brake switch off

      (Switch pin pushed in)

      		 10 MΩ or higher

      If the result is not as specified, replace the parking brake switch assembly.