POWER STEERING SYSTEM DTC CHECK / CLEAR


  1. CHECK DTC


    1. Turn the ignition switch off.

    2. Connect the GTS to the DLC3.

    3. Turn the ignition switch to ON.

    4. Turn the GTS on.

    5. Read the DTCs following the display on the GTS. Enter the following menus: Chassis / EMPS / Trouble Codes.

    6. Refer to Diagnostic Trouble Code Chart for DTC information Click here.

  2. CLEAR DTC


    1. Turn the ignition switch off.

    2. Connect the GTS to the DLC3.

    3. Turn the ignition switch to ON.

    4. Turn the GTS on.

    5. Clear the DTCs following the display on the GTS. Enter the following menus: Chassis / EMPS / Trouble Codes.

    6. According to the display on the GTS, select the trouble code data display with the clear button.

    7. Turn the ignition switch off.

    8. Disconnect the GTS from the DLC3.