REAR SPEED SENSOR (for 2WD) REMOVAL

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

  • The rear speed sensor is a component of the rear axle hub and bearing assembly. If the sensor malfunctions, replace the rear axle hub and bearing assembly.

  • If the sensor rotor needs to be replaced, replace it together with the rear axle hub and bearing assembly.


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  2. REMOVE REAR WHEEL

  3. SEPARATE REAR SPEED SENSOR WIRE


    1. A01EKAV

      Using a screwdriver, disconnect the connector from the rear speed sensor.

      Note

      Be careful not to damage the rear speed sensor.

  4. SEPARATE REAR FLEXIBLE HOSE


    1. A01EMT1

      Remove the bolt and separate the rear flexible hose from the rear shock absorber with coil spring.

  5. SEPARATE REAR DISC BRAKE CALIPER ASSEMBLY


    1. A01EM42

      Remove the 2 bolts and rear disc brake caliper assembly.

      Note


      • Do not disconnect the rear brake flexible hose from the rear disc brake caliper assembly.

      • Use wire or an equivalent tool to keep the rear disc brake caliper assembly from hanging down by the rear brake flexible hose.

  6. REMOVE REAR DISC


    1. A01ELX3E01
      Text in Illustration
      *1 Matchmark

      Put matchmarks on the rear disc and rear axle hub.

      Tech Tips

      The above step is not necessary when the rear disc will be replaced.

    2. A01EL4A

      Release the parking brake and remove the rear disc.

      Tech Tips

      If the rear disc cannot be removed easily, insert a screwdriver through the service hole to loosen the parking brake shoes by turning the adjusting screw.

  7. REMOVE REAR AXLE HUB AND BEARING ASSEMBLY


    1. Remove the rear axle hub and bearing assembly Click here.

      Tech Tips


      • The rear speed sensor is a component of the rear axle hub and bearing assembly. If the sensor malfunctions, replace the rear axle hub and bearing assembly.

      • If the sensor rotor needs to be replaced, replace it together with the rear axle hub and bearing assembly.