VSC OFF SWITCH INSTALLATION


  1. INSTALL VSC OFF SWITCH


    1. A01EKUQE03

      Engage the 2 claws and install the VSC OFF switch.

  2. INSTALL LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL


    1. A01EJS4

      Connect the hood lock control cable.

    2. A01EITG

      Connect the aspirator duct and connector.

    3. A01EKDA

      Connect the connectors.

    4. Engage the claw and 9 clips.

    5. Install the lower No. 1 instrument panel finish panel with the bolt <C> and screw <E> or <F>.

  3. INSTALL COWL SIDE TRIM SUB-ASSEMBLY LH


    1. A01EJEA

      Engage the 2 clips to install the cowl side trim sub-assembly LH.

    2. Install the clip.

  4. INSTALL FRONT DOOR SCUFF PLATE LH


    1. A01ELE9

      Engage the guide, 3 clips and the 7 claws to install the front door scuff plate LH.

  5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  6. CHECK FOR WARNING LIGHT AND INDICATOR LIGHT

    Tech Tips

    Click here.