YAW RATE AND ACCELERATION SENSOR INSTALLATION


  1. INSTALL YAW RATE AND ACCELERATION SENSOR


    1. A01EKLUE01

      Install the yaw rate and acceleration sensor to the bracket with the 2 nuts.

      Torque:
      5.0 N*m  { 51 kgf*cm, 44 in.*lbf }
    2. A01EKX8E01

      Install the yaw rate and acceleration sensor with bracket with the 2 bolts.

      Torque:
      13 N*m  { 127 kgf*cm, 9 ft.*lbf }

      Note


      • Be sure to insert the yaw rate and acceleration sensor claw into the stopper hole while installing the yaw rate and acceleration sensor.

      • Do not damage the yaw rate and acceleration sensor.

      • Make sure that the yaw rate and acceleration sensor is installed securely.

    3. Connect the connector to the yaw rate and acceleration sensor.

      Note

      Make sure that the yaw rate and acceleration sensor connector is connected securely.

  2. INSTALL NO. 4 CENTER MEMBER FLOOR REINFORCE SUB-ASSEMBLY


    1. A01EKRFE01

      Install the No. 4 center member floor reinforce sub-assembly with the 7 bolts.

      Torque:
      19 N*m  { 194 kgf*cm, 14 ft.*lbf }

    2. Return the floor carpet assembly to an original state.

  3. INSTALL CONSOLE BOX SUB-ASSEMBLY


    1. A01ELB3

      Engage the 2 claws and 4 clips.

    2. A01EK7A

      Engage the 2 clamps.

    3. Connect the connector.

    4. Install the clip.

    5. Install the console box sub-assembly with the 2 screws <E> or <F>.

  4. INSTALL POSITION INDICATOR HOUSING ASSEMBLY


    1. A01ELXD

      Engage the 3 clips to position indicator housing assembly.

    2. Connect the connector.

    3. Move the shift lever to P.

  5. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY


    1. A01EJGU

      Turn the shift lever knob clockwise to install the shift lever knob sub-assembly.

  6. INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY


    1. A01EIMR

      Connect the connectors.

    2. Engage the 5 guides, 2 clips and claw.

    3. A01EJR6

      Install the lower instrument panel sub-assembly with the bolt <C> and 4 screws <E> or <F>.

  7. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY


    1. A01ELH3

      Engage the guide and 3 claws to install the No. 2 instrument panel under cover sub-assembly.

  8. INSTALL COWL SIDE TRIM SUB-ASSEMBLY RH

    Tech Tips

    Use the same procedure as for the LH side Click here.

  9. INSTALL FRONT DOOR SCUFF PLATE RH

    Tech Tips

    Use the same procedure as for the LH side Click here.

  10. INSTALL LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL


    1. A01EJS4

      Connect the hood lock control cable.

    2. A01EITG

      Connect the aspirator duct and connector.

    3. A01EKDA

      Connect the connectors.

    4. Engage the claw and 9 clips.

    5. Install the lower No. 1 instrument panel finish panel with the bolt <C> and screw <E> or <F>.

  11. INSTALL COWL SIDE TRIM SUB-ASSEMBLY LH


    1. A01EJEA

      Engage the 2 clips to install the cowl side trim sub-assembly LH.

    2. Install the clip.

  12. INSTALL FRONT DOOR SCUFF PLATE LH


    1. A01ELE9

      Engage the guide, 3 clips and the 7 claws to install the front door scuff plate LH.

  13. INSTALL AIR CONDITIONING CONTROL ASSEMBLY


    1. Connect the connector.

    2. A01EITTE01

      Engage the 2 clips and 4 guides.

    3. Remove the protective tape.

      Text in Illustration
      *1 Protective Tape
    4. A01EK00

      Install the air conditioning control assembly with the screw.

  14. INSTALL CONSOLE BOX ASSEMBLY


    1. A01EJXQ

      Connect the connectors.

    2. Engage the 2 claws.

    3. A01EKCR

      Install the screw and 2 clips.

    4. A01EKRE

      Install the console box assembly with the 2 bolts.

  15. INSTALL NO. 2 CONSOLE BOX CARPET


    1. A01EKN6

      Install the No. 2 console box carpet.

  16. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY


    1. A01EJBME01

      Connect the connectors.

    2. Engage the 6 clips to install the upper console panel sub-assembly as shown in the illustration.

  17. INSTALL FRONT SEAT ASSEMBLY LH

    Tech Tips

    Refer to the instructions for Installation of the front seat assembly LH Click here

  18. INSTALL FRONT SEAT ASSEMBLY RH

    Tech Tips

    Perform the same procedure as the LH side.