TIRE AND WHEEL SYSTEM INSPECTION


  1. INSPECT TIRES


    1. Inspect the tires for wear and proper inflation pressure.

      Cold Tire Inflation Pressure
      Tire Size

      Front

      kPa (kgf/cm2, psi)

      Rear

      kPa (kgf/cm2, psi)
      245/55R19 103S 220 (2.2, 32) 220 (2.2, 32)
    2. A01EL7K

      Using a dial indicator, check the runout of the tires.

      Maximum tire runout
      1.4 mm (0.0551 in.)

  2. ROTATE TIRES


    1. A01EMP4

      Rotate the tires as shown in the illustration.

      Text in Illustration
      A01EM1I Front
      Torque:
      Axle hub nut
      103 N*m  { 1050 kgf*cm, 76 ft.*lbf }

  3. INSPECT WHEEL BALANCE


    1. A01EJCHE06

      Inspect and adjust the off-the-car balance.

      Maximum wheel imbalance after adjustment
      8.0 g (0.0176 lb)

      Note


      • Use a cleaning detergent to remove dirt, oil and water from the surface where the balance weight is to be adhered.

      • Do not touch the adhesive surface of the balance weight.

      • Adhere a stick-on type balance weight to the flat surface (A) shown in the illustration.

        Width (A)
        25 mm (0.984 in.)

      • Push the balance weight with your finger to securely adhere it to the desired position.

      • Do not reuse balance weights.

      Tech Tips

      The inner side balance weight should be installed by clipping it to the rim.

  4. INSPECT FRONT AXLE HUB BEARING LOOSENESS


    1. Inspect the front axle hub bearing looseness Click here.

  5. INSPECT REAR AXLE HUB BEARING LOOSENESS (for 2WD)


    1. Inspect the rear axle hub bearing looseness Click here.

  6. INSPECT REAR AXLE HUB BEARING LOOSENESS (for AWD)


    1. Inspect the rear axle hub bearing looseness Click here.

  7. INSPECT FRONT AXLE HUB RUNOUT


    1. Inspect the front axle hub runout Click here.

  8. INSPECT REAR AXLE HUB RUNOUT (for 2WD)


    1. Inspect the rear axle hub runout Click here.

  9. INSPECT REAR AXLE HUB RUNOUT (for AWD)


    1. Inspect the rear axle hub runout Click here.