REAR STABILIZER BAR (for AWD) INSTALLATION


  1. TEMPORARILY INSTALL REAR STABILIZER BAR BRACKET LH (for Front Side)


    1. A01EKYX

      Temporarily install the rear stabilizer bar bracket LH (front side) with the bolt.

      Tech Tips

      Loosely tighten the bolt so that the bracket can be moved by hand.

  2. TEMPORARILY INSTALL REAR STABILIZER BAR BRACKET RH (for Front Side)


    1. A01ELYD

      Temporarily install the rear stabilizer bar bracket RH (front side) with the 2 bolts.

      Tech Tips

      Loosely tighten the bolts so that the bracket can be moved by hand.

  3. INSTALL REAR STABILIZER BUSHING (for LH Side)


    1. A01EMIEE02

      Install the rear stabilizer bushing (LH side) to the rear stabilizer bar.

      Note

      Make sure that the cutout of the rear stabilizer bushing is positioned within the range shown in the illustration.

  4. INSTALL REAR STABILIZER BUSHING (for RH Side)


    1. A01EJ3DE01

      Install the rear stabilizer bushing (RH side) to the rear stabilizer bar.

      Note

      Make sure that the cutout of the rear stabilizer bushing is positioned within the range shown in the illustration.

  5. INSTALL REAR STABILIZER BAR BRACKET LH (for Rear Side)


    1. A01EJ6B

      Install the rear stabilizer bar bracket LH (rear side) with the 2 bolts.

      Torque:
      19 N*m  { 194 kgf*cm, 14 ft.*lbf }

  6. INSTALL REAR STABILIZER BAR BRACKET RH (for Rear Side)


    1. A01EJMD

      Install the rear stabilizer bar bracket RH (rear side) with the 2 bolts.

      Torque:
      19 N*m  { 194 kgf*cm, 14 ft.*lbf }

  7. FULLY TIGHTEN REAR STABILIZER BAR BRACKET LH (for Front Side)


    1. A01EKUT

      Fully tighten the bolt.

      Torque:
      54 N*m  { 551 kgf*cm, 40 ft.*lbf }

  8. FULLY TIGHTEN REAR STABILIZER BAR BRACKET RH (for Front Side)


    1. A01EJ49

      Fully tighten the 2 bolts.

      Torque:
      19 N*m  { 194 kgf*cm, 14 ft.*lbf }

  9. INSTALL REAR LOWER SUSPENSION BRACE (for LH Side)


    1. A01EJHT

      Install the rear lower suspension brace with the bolt and the nut.

      Torque:
      35 N*m  { 357 kgf*cm, 26 ft.*lbf }

  10. INSTALL REAR LOWER SUSPENSION BRACE (for RH Side)

    Tech Tips

    Perform the same procedure as the LH side.

  11. INSTALL NO. 1 FLOOR UNDER COVER


    1. A01EKRT

      Install the No. 1 floor under cover with the 5 clips.

  12. INSTALL REAR STABILIZER LINK ASSEMBLY LH


    1. A01EM9AE01
      Text in Illustration
      *1 Turn
      *2 Hold

      Install the rear stabilizer link assembly LH to the rear shock absorber with coil spring LH with the nut.

      Torque:
      39 N*m  { 400 kgf*cm, 29 ft.*lbf }

      Tech Tips

      If the ball joint turns together with the nut, use a hexagon wrench (5 mm) to hold the stud bolt.

    2. A01ELZWE01
      Text in Illustration
      *1 Turn
      *2 Hold

      Install the rear stabilizer link assembly LH to the rear stabilizer bar with the nut.

      Torque:
      39 N*m  { 400 kgf*cm, 29 ft.*lbf }

      Tech Tips

      If the ball joint turns together with the nut, use a hexagon wrench (5 mm) to hold the stud bolt.

  13. INSTALL REAR STABILIZER LINK ASSEMBLY RH

    Tech Tips

    Perform the same procedure as the LH side.

  14. INSTALL REAR WHEELS

    Torque:
    103 N*m  { 1050 kgf*cm, 76 ft.*lbf }