REAR STABILIZER BAR (for 2WD) INSTALLATION


  1. INSTALL REAR STABILIZER BUSHING (for LH Side)


    1. A01EJTX

      Install the rear stabilizer bushing.

      Note

      Bushing slit should always face vehicle forwards, even if bushing "FRONT" text does not exist.

  2. INSTALL REAR STABILIZER BUSHING (for RH Side)

    Tech Tips

    Perform the same procedure as the LH side.

  3. INSTALL REAR NO. 1 STABILIZER BAR BRACKET (for LH Side)


    1. A01EIRF

      Install the rear No. 1 stabilizer bar bracket.

  4. INSTALL REAR NO. 1 STABILIZER BAR BRACKET (for RH Side)

    Tech Tips

    Perform the same procedure as the LH side.

  5. INSTALL REAR STABILIZER BAR


    1. A01EJBQE02

      Install the rear stabilizer bar with the 4 bolts in order 1 to 2.

      Torque:
      19 N*m  { 194 kgf*cm, 14 ft.*lbf }

  6. INSTALL REAR STABILIZER LINK ASSEMBLY LH


    1. A01EJP9E04
      Text in Illustration
      *1 Turn
      *2 Hold

      Install the rear stabilizer link assembly LH to the rear shock absorber with coil spring LH with the nut.

      Torque:
      39 N*m  { 400 kgf*cm, 29 ft.*lbf }

      Tech Tips

      If the ball joint turns together with the nut, use a hexagon wrench (5 mm) to hold the stud bolt.

    2. A01EM11E01
      Text in Illustration
      *1 Turn
      *2 Hold

      Install the rear stabilizer link assembly LH to the rear stabilizer bar with the nut.

      Torque:
      39 N*m  { 400 kgf*cm, 29 ft.*lbf }

      Tech Tips

      If the ball joint turns together with the nut, use a hexagon wrench (5 mm) to hold the stud bolt.

  7. INSTALL REAR STABILIZER LINK ASSEMBLY RH

    Tech Tips

    Perform the same procedure as the LH side.

  8. INSTALL REAR WHEELS

    Torque:
    103 N*m  { 1050 kgf*cm, 76 ft.*lbf }