REAR STRUT ROD REMOVAL

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The procedure listed below is for the LH side.


  1. REMOVE REAR WHEEL

  2. SEPARATE NO. 3 PARKING BRAKE CABLE ASSEMBLY


    1. A01EKY9

      Remove the bolt and separate the No. 3 parking brake cable assembly.

  3. REMOVE REAR STRUT ROD ASSEMBLY (for 2WD)


    1. A01EK2M

      Remove the 2 bolts, the 2 nuts and the rear strut rod assembly.

      Note

      Since stopper nuts are used, loosen the bolts.

  4. REMOVE REAR STRUT ROD ASSEMBLY (for AWD)


    1. A01EK0A

      Remove the 2 bolts, the 2 nuts and the rear strut rod assembly.

      Note

      Since stopper nuts are used, loosen the bolts.