REAR SHOCK ABSORBER DISPOSAL


  1. DISPOSE OF REAR SHOCK ABSORBER


    1. A01EJSXE01

      Fully extend the shock absorber piston rod.

    2. Using a drill, make a hole in area B shown in the illustration to discharge the gas inside.

      Length (A)
      25 mm (0.984 in.)
      Length (B)
      25 mm (0.984 in.)

      Note

      Be careful when drilling because shards of metal may fly about. Always use proper safety equipment.

      Tech Tips

      The gas is colorless, odorless and non-poisonous.