INSTALL FRONT NO. 1 STABILIZER BAR BUSHING
| *1 | Cutout |
| *2 | Front of the Vehicle |
| *3 | Inside of the Vehicle |
Install the 2 front No. 1 stabilizer bar bushings to the front stabilizer bar as shown in the illustration.
Note
When installing the front No. 1 stabilizer bar bushings, make sure that the cutout faces the rear of the vehicle.
INSTALL FRONT NO. 2 STABILIZER BRACKET LH
Install the front No. 2 stabilizer bracket LH to the front No. 1 stabilizer bar bushing.
INSTALL FRONT NO. 2 STABILIZER BRACKET RH
Tech Tips
Perform the same procedure as the LH side.
INSTALL FRONT STABILIZER BAR (for AWD)
Install the front stabilizer bar.
INSTALL FRONT NO. 1 STABILIZER BRACKET LH (for AWD)
Install the front No. 1 stabilizer bracket LH to the front frame assembly with the 2 bolts.
INSTALL FRONT NO. 1 STABILIZER BRACKET RH (for AWD)
Tech Tips
Perform the same procedure as the LH side.
INSTALL FRONT STABILIZER BAR (for 2WD)
Install the front stabilizer bar from the left side of the vehicle.
INSTALL FRONT STABILIZER LINK ASSEMBLY LH
Install the front stabilizer link assembly LH with the 2 nuts.
Tech Tips
If the ball joint turns together with the nut, use a hexagon wrench (6 mm) to hold the stud bolt.
INSTALL FRONT STABILIZER LINK ASSEMBLY RH
Tech Tips
Perform the same procedure as the LH side.
INSTALL STEERING LINK ASSEMBLY (for 2WD)
Tech Tips
Refer to the procedure form Install Steering Link Assembly Click here.
INSTALL ENGINE ASSEMBLY WITH TRANSAXLE (for AWD)
Tech Tips
Refer to the procedure form Install Engine Assembly with Transaxle Click here.