REAR DRIVE SHAFT ASSEMBLY (for AWD) INSPECTION


  1. INSPECT REAR DRIVE SHAFT ASSEMBLY


    1. A01ELK8E04

      Check whether the drive shaft dimensions are within the following specifications.

      Tech Tips

      The following table shows the dimension (A) of the drive shaft.

      Dimension (A)
      LH 762.1 to 772.1 mm (2.50 to 2.53 ft.)
      RH 742.1 to 752.1 mm (2.43 to 2.47 ft.)
    2. A01ELCKE03

      Check that there is no remarkable play in the radial direction of the outboard joint.

    3. Check that the inboard joint slides smoothly in the thrust direction.

    4. Check that there is no remarkable play in the radial direction of the inboard joint.

    5. Check the boots for damage.