FRONT DRIVE SHAFT ASSEMBLY INSPECTION


  1. INSPECT FRONT DRIVE SHAFT ASSEMBLY


    1. A01EMKZE04

      Check whether the drive shaft dimensions are within the following specifications.

      Tech Tips

      The following table shows the dimension (A) of the drive shaft.

      Dimension (A)
      for 2WD LH 600.36 to 604.36 mm (1.97 to 1.98 ft.)
      RH 916.96 to 920.96 mm (3.01 to 3.02 ft.)
      for AWD LH 600.36 to 604.36 mm (1.97 to 1.98 ft.)
      RH 892.21 to 896.21 mm (2.93 to 2.94 ft.)
    2. A01ELCKE02

      Check that there is no excessive play in the outboard joint.

    3. Check that the inboard joint slides smoothly in the thrust direction.

    4. Check that there is no excessive play in the radial direction of the inboard joint.

    5. Check the boots for damage.