TCM REMOVAL

Note

When the TCM is replaced, the existing transaxle compensation codes must be input into a new TCM Click here.


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  2. REMOVE COOL AIR INTAKE DUCT SEAL


    1. A01EJEH

      Remove the 12 clips and cool air intake duct seal.

  3. REMOVE BATTERY


    1. A01ELF9

      Remove the nut and separate the positive (+) battery terminal.

    2. Loosen the nut and remove the bolt and battery clamp.

    3. Remove the battery and battery tray.

  4. REMOVE TCM


    1. A01EJQX

      Turn the lock lever and disconnect the connector from the TCM.

    2. A01ELID

      Remove the 2 bolts and TCM from the transaxle.