DIFFERENTIAL OIL SEAL (for RH Side) REPLACEMENT

Text in Illustration

*1	Vinyl Tape

for Outside:

1. Using a screwdriver with vinyl tape wound around tip, remove the front transaxle case oil seal.

   Note

   Be careful not to damage the housing.

for Inside:

1. Using SST, tap out the front transaxle case oil seal.

   SST

   09308-00010

   Note

   Be careful not to damage the housing.

for Inside:

1. Coat the lip of a new front transaxle case oil seal with MP grease.

2. Using SST and a hammer, tap in the front transaxle case oil seal.

   SST

   09950-60010   ( 09951-00410 )

   09950-70010   ( 09951-07200 )

   Oil seal driven in depth
   21.5 to 22.5 mm (0.846 to 0.886 in.)

for Outside:

1. Coat the lip of a new front transaxle case oil seal with MP grease.

2. Using SST and a hammer, tap in the front transaxle case oil seal.

   SST

   09649-17010

   09950-70010   ( 09951-07200 )

   Oil seal driven in depth
   5.5 to 6.5 mm (0.217 to 0.256 in.)

   Note

   Check that the oil seal is installed in the correct direction.