TCM INSTALLATION


  1. INSTALL TCM


    1. Install the TCM to the transaxle.

    2. A01ELIDE04

      Install and tighten the 2 bolts in the order shown in the illustration.

      Torque:
      11 N*m  { 115 kgf*cm, 8 ft.*lbf }
    3. A01EJRW

      Connect the connector to the TCM.

    4. Turn the lock lever and secure the connector with the lock lever.

  2. INSTALL BATTERY


    1. Install the battery tray and battery.

    2. A01ELF9E01

      Install the battery clamp with the bolt and nut.

      Torque:
      Bolt A
      9.0 N*m  { 92 kgf*cm, 80 in.*lbf }
      Nut B
      3.5 N*m  { 36 kgf*cm, 31 in.*lbf }

    3. Install the positive (+) battery terminal with the nut.

      Torque:
      6.4 N*m  { 65 kgf*cm, 57 in.*lbf }

  3. INSTALL COOL AIR INTAKE DUCT SEAL


    1. A01EJEH

      Install the cool air intake duct seal with the 12 clips.

  4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  5. PERFORM TCM REGISTRATION

    Tech Tips

    Click here.