CRUISE CONTROL MAIN SWITCH INSPECTION


  1. INSPECT CRUISE CONTROL MAIN SWITCH


    1. for vehicles without vehicle-to-vehicle distance control mode:


      1. Measure the resistance according to the value(s) in the table below.

        A01ELD4E09
        Text in Illustration
        *1

        Component without harness connected:

        (Cruise Control Main Switch)

        		 *2 Main Switch
        *3 Lever *4 ON/OFF
        *5 - SET *6 + RES
        *7 CANCEL - -
        Standard Resistance
        Tester Connection Switch Condition Specified Condition
        1 (ECC) - 3 (CCS) Main Switch off*1 1 MΩ or higher
        Main Switch on Below 2.5 Ω
        + RES 235 to 245 Ω
        - SET 617 to 643 Ω
        CANCEL 1509 to 1571 Ω

        *1: Lever is in neutral position

        If the result is not as specified, replace the cruise control main switch.