ENGINE SWITCH INSTALLATION


  1. INSTALL ENGINE SWITCH


    1. A01EJ10E01

      Attach the 2 claws to install the engine switch.

  2. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY


    1. A01EK1A

      Connect the connector.

    2. Engage the 4 claws to install the lower instrument panel finish panel assembly.

  3. INSTALL INSTRUMENT CLUSTER FINISH PANEL


    1. A01EISD

      Engage the 3 claws.

    2. Install the instrument cluster finish panel with the 2 clips.

  4. INSTALL UPPER STEERING COLUMN COVER


    1. A01EK5A

      Engage the 4 clips and 2 guides to install the upper steering column cover onto the instrument panel cluster finish panel.

    2. A01EJEM

      Engage the claw to install the upper steering column cover.

  5. INSTALL LOWER STEERING COLUMN COVER


    1. A01EKV0

      Engage the 2 claws to install the lower steering column cover.

    2. Install the 2 screws.

      Torque:
      2.0 N*m  { 20 kgf*cm, 18 in.*lbf }

  6. INSTALL CONSOLE BOX SUB-ASSEMBLY


    1. A01ELB3

      Engage the 2 claws and 4 clips.

    2. A01EK7A

      Engage the 2 clamps.

    3. Connect the connector.

    4. Install the clip.

    5. Install the console box sub-assembly with the 2 screws <E> or <F>.

  7. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY


    1. A01EJGU

      Turn the shift lever knob clockwise to install the shift lever knob sub-assembly.

  8. INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY


    1. A01EIMR

      Connect the connectors.

    2. Engage the 5 guides, 2 clips and claw.

    3. A01EJR6

      Install the lower instrument panel sub-assembly with the bolt <C> and 4 screws <E> or <F>.

  9. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY


    1. A01ELH3

      Engage the guide and 3 claws to install the No. 2 instrument panel under cover sub-assembly.

  10. INSTALL COWL SIDE TRIM SUB-ASSEMBLY RH

    Tech Tips

    Use the same procedure as for the LH side Click here.

  11. INSTALL FRONT DOOR SCUFF PLATE RH

    Tech Tips

    Use the same procedure as for the LH side Click here.

  12. INSTALL LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL


    1. A01EJS4

      Connect the hood lock control cable.

    2. A01EITG

      Connect the aspirator duct and connector.

    3. A01EKDA

      Connect the connectors.

    4. Engage the claw and 9 clips.

    5. Install the lower No. 1 instrument panel finish panel with the bolt <C> and screw <E> or <F>.

  13. INSTALL COWL SIDE TRIM SUB-ASSEMBLY LH


    1. A01EJEA

      Engage the 2 clips to install the cowl side trim sub-assembly LH.

    2. Install the clip.

  14. INSTALL FRONT DOOR SCUFF PLATE LH


    1. A01ELE9

      Engage the guide, 3 clips and the 7 claws to install the front door scuff plate LH.

  15. INSTALL AIR CONDITIONING CONTROL ASSEMBLY


    1. Connect the connector.

    2. A01EITTE01

      Engage the 2 clips and 4 guides.

    3. Remove the protective tape.

      Text in Illustration
      *1 Protective Tape
    4. A01EK00

      Install the air conditioning control assembly with the screw.

  16. INSTALL CONSOLE BOX ASSEMBLY


    1. A01EJXQ

      Connect the connectors.

    2. Engage the 2 claws.

    3. A01EKCR

      Install the screw and 2 clips.

    4. A01EKRE

      Install the console box assembly with the 2 bolts.

  17. INSTALL NO. 2 CONSOLE BOX CARPET


    1. A01EKN6

      Install the No. 2 console box carpet.

  18. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY


    1. A01EJBME01

      Connect the connectors.

    2. Engage the 6 clips to install the upper console panel sub-assembly as shown in the illustration.

  19. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.