STARTER INSTALLATION


  1. INSTALL STARTER ASSEMBLY


    1. A01EL88

      Install the starter with the 2 bolts.

      Torque:
      37 N*m  { 377 kgf*cm, 27 ft.*lbf }
    2. A01EK2A

      Connect the starter connector.

    3. Install the terminal nut and cover the nut with the cap.

      Torque:
      9.8 N*m  { 100 kgf*cm, 87 in.*lbf }

  2. INSTALL BATTERY


    1. Install the battery tray and battery.

    2. A01ELF9E01

      Install the battery clamp with the bolt and nut.

      Torque:
      Bolt A
      9.0 N*m  { 92 kgf*cm, 80 in.*lbf }
      Nut B
      3.5 N*m  { 36 kgf*cm, 31 in.*lbf }

    3. Install the positive (+) battery terminal with the nut.

      Torque:
      6.4 N*m  { 65 kgf*cm, 57 in.*lbf }

  3. INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY


    1. A01EK9G

      Fit the 3 retainers and install the No. 1 engine cover sub-assembly.

  4. INSTALL COOL AIR INTAKE DUCT SEAL


    1. A01EJEH

      Install the cool air intake duct seal with the 12 clips.

  5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.