STARTER DISASSEMBLY


  1. REMOVE MAGNETIC SWITCH ASSEMBLY


    1. A01EKE3

      Remove the nut and disconnect the lead wire from the magnetic switch.

    2. A01EM4X

      Remove the 2 screws holding the magnetic switch to the starter drive housing.

    3. Remove the magnetic switch.

    4. Remove the return spring and plunger from the starter drive housing.

  2. REMOVE STARTER YOKE ASSEMBLY


    1. A01EIMK

      Remove the 2 through-bolts, and pull out the starter yoke together with the commutator end frame.

    2. A01ELJA

      Remove the starter yoke from the commutator end frame.

  3. REMOVE STARTER ARMATURE PLATE


    1. A01EKUN

      Remove the armature plate from the starter yoke.

  4. REMOVE STARTER COMMUTATOR END FRAME COVER


    1. A01EJ12

      Using a screwdriver, pry out the commutator end frame cover.

  5. REMOVE STARTER ARMATURE ASSEMBLY


    1. A01EJK5E09
      Text in Illustration
      *1 Snap Ring Pliers

      Using snap ring pliers, remove the snap ring and plate washer.

      Note

      Do not drop the starter armature assembly.

    2. Remove the armature from the commutator end frame.

  6. REMOVE PLANETARY GEAR


    1. A01ELG5

      Remove the 3 planetary gears from the starter drive housing.