FUEL SENDER GAUGE ASSEMBLY INSPECTION


  1. INSPECT FUEL SENDER GAUGE

    A01EJV1E01
    Text in Illustration
    *1

    Component without connected

    (Fuel Sender Gauge Assembly)

    1. Remove the fuel sender gauge.

    2. Check that the float moves smoothly between F and E.

    3. Measure the resistance between terminals 2 and 1 of the connector according to the value(s) in the table below.

      Standard Resistance
      Float Level Resistance (Ω)
      F 6.5 to 8.5
      Between E and F 6.5 to 187.2 (Gradually changes)
      E 183.2 to 187.2

      If the result is not as specified, replace the fuel sender gauge.

  2. INSPECT FUEL SENDER GAUGE ASSEMBLY

    A01EMDUE01
    Text in Illustration
    *1

    Component without connected

    (Fuel Sender Gauge Assembly)

    1. Remove the fuel sender gauge assembly.

    2. Check that the float moves smoothly between F and E.

    3. Measure the resistance between terminals 1 and 2 according to the value(s) in the table below.

      Standard Resistance
      Float Level Resistance (Ω)
      F 6.5 to 8.5
      Between E and F 6.5 to 227.3 (Gradually changes)
      E 222.3 to 227.3

      If the result is not as specified, replace the fuel sender gauge assembly.