FUEL SENDER GAUGE ASSEMBLY REMOVAL


  1. DISCHARGE FUEL SYSTEM PRESSURE


    1. Discharge fuel system pressure Click here.

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. REMOVE FUEL SUCTION TUBE ASSEMBLY WITH PUMP AND GAUGE


    1. Remove the fuel suction tube assembly with pump and gauge Click here.

  4. REMOVE FUEL SENDER GAUGE


    1. A01EL8CE01

      Disconnect the fuel sender gauge connector from the fuel suction plate.

    2. Press down on the fuel sender gauge claw labeled A. Then slide the fuel sender gauge upward.

      Note

      Do not touch the sender resistance plate or contact area.

  5. REMOVE REAR NO. 2 FLOOR SERVICE HOLE COVER


    1. A01EKZO

      Remove the rear No. 2 floor service hole cover.

    2. Disconnect the fuel sender gauge connector.

  6. REMOVE FUEL SENDER GAUGE ASSEMBLY


    1. A01EJWP

      Remove the 6 bolts and fuel sender gauge assembly from the fuel tank.

      Note

      Be careful not to bend the arm of the fuel sender gauge.