FUEL PUMP REASSEMBLY


  1. INSTALL FUEL PUMP ASSEMBLY WITH FILTER


    1. A01EJFOE01
      Text in Illustration
      *1 O-ring
      *2 Spacer

      Apply gasoline to a new O-ring. Then install the O-ring and spacer to the fuel pump.

    2. A01EJHS

      Engage the 5 claws on the fuel filter and install the fuel pump assembly with filter.

      Note


      • Make sure the O-ring is not cut or pinched during the installation.

      • Attach the claws securely.

  2. INSTALL FUEL FILTER ASSEMBLY


    1. A01EJHPE08
      Text in Illustration
      *1 Jet Pump
      *2 O-ring

      Apply gasoline to a new O-ring and install it to the jet pump.

    2. A01EKX2E01

      Install the jet pump to the sub-tank as shown in the illustration.

    3. A01EMD5

      Connect the jet pump nozzle to the fuel sub-tank.

    4. A01EKBV

      Install the fuel filter to the sub-tank and attach the 2 claws.

    5. A01EJ3Q

      Connect the fuel pump connector to the fuel pump.

  3. INSTALL FUEL SUCTION PLATE SUB-ASSEMBLY


    1. Install the spring to the fuel suction plate shaft.

    2. Install the fuel suction plate to the sub-tank.

    3. A01EIWEE03
      Text in Illustration
      *1 E-ring

      Install a new E-ring.

    4. A01EJ91

      Connect the fuel pump connector to the fuel suction plate.

  4. INSTALL FUEL SENDER GAUGE


    1. A01EL8CE02

      Install the fuel sender gauge by sliding it downward.

      Note

      Make sure that the fuel sender gauge arm does not bend.

    2. Connect the connector of the fuel sender gauge.

      Note

      Do not damage the wire harness.