EXHAUST MANIFOLD REMOVAL

CAUTION:


  • Wear protective gloves when removing the exhaust pipe.


  • The exhaust pipe is extremely hot immediately after the engine has stopped.


  • Confirm that the exhaust pipe has cooled down before removing it.


  1. REMOVE NO. 1 ENGINE UNDER COVER

  2. REMOVE NO. 2 ENGINE UNDER COVER

  3. REMOVE FRONT EXHAUST PIPE ASSEMBLY


    1. A01EINH

      Disconnect the clamp and connector.

    2. A01EMOV

      Remove the 4 bolts, 2 compression springs and front exhaust pipe assembly.

    3. Remove the 2 gaskets from the exhaust manifold converter sub-assembly and center exhaust pipe assembly.

  4. REMOVE AIR FUEL RATIO SENSOR (for Bank 1 Sensor 1)


    1. A01ELYB

      Disconnect the air fuel ratio sensor connector.

    2. Remove the wire harness clamp.

    3. A01EKKAE01

      Using SST, remove the air fuel ratio sensor from the exhaust manifold.

      SST
      09224-00010

  5. REMOVE MANIFOLD STAY


    1. A01EIZ0

      Remove the bolt, nut and manifold stay.

  6. REMOVE NO. 2 MANIFOLD STAY


    1. A01EL42

      Remove the bolt, nut and No. 2 manifold stay.

  7. REMOVE NO. 1 EXHAUST MANIFOLD HEAT INSULATOR


    1. A01EIRR

      Remove the 4 bolts and No. 1 exhaust manifold heat insulator.

  8. REMOVE EXHAUST MANIFOLD CONVERTER SUB-ASSEMBLY


    1. A01EKL4

      Remove the 5 nuts and exhaust manifold converter sub-assembly.

  9. REMOVE NO. 2 EXHAUST MANIFOLD HEAT INSULATOR


    1. A01EKXO

      Remove the 2 bolts and No. 2 exhaust manifold heat insulator.

  10. REMOVE NO. 1 MANIFOLD CONVERTER INSULATOR


    1. A01EMSR

      Remove the 4 bolts and No. 1 manifold converter insulator.