INTAKE AIR CONTROL VALVE ACTUATOR (for TCV) REMOVAL


  1. REMOVE INTAKE MANIFOLD


    1. Remove the intake manifold Click here.

  2. REMOVE INTAKE AIR CONTROL VALVE ACTUATOR (for TCV)


    1. A01EM2V

      Remove the 2 bolts, intake air control valve actuator and gasket from the intake manifold.

      Note


      • A01ELMK

        Make sure that foreign matter, such as water, oil, sand and iron particles, does not enter the gear chamber or actuator at the locations marked by the circles in the illustration.

      • A01EIP1

        Do not loosen or remove the bolt and 2 nuts shown in the illustration.