REAR CRANKSHAFT OIL SEAL REMOVAL


  1. REMOVE ENGINE ASSEMBLY WITH TRANSAXLE


    1. Remove the engine assembly with transaxle Click here.

  2. REMOVE AUTOMATIC TRANSAXLE ASSEMBLY (for 2WD)


    1. Remove the automatic transaxle assembly Click here.

  3. REMOVE AUTOMATIC TRANSAXLE ASSEMBLY (for AWD)


    1. Remove the automatic transaxle assembly Click here.

  4. REMOVE DRIVE PLATE AND RING GEAR SUB-ASSEMBLY


    1. A01EJA1E02

      Using SST, hold the crankshaft pulley.

      SST
      09213-54015
      09330-00021

      Tech Tips

      SST (Crankshaft pulley holding tool) Fixing bolt part No. : 91551-80650(2 pcs)

    2. A01EK4C

      Remove the 8 bolts, front drive plate spacer, drive plate and ring gear sub-assembly, and rear drive plate spacer.

  5. REMOVE REAR ENGINE OIL SEAL


    1. A01EJKSE04
      Text in Illustration
      *1 Cut Position

      Using a knife, cut off the lip of the oil seal.

    2. Using a screwdriver, pry out the oil seal.

      Tech Tips

      Tape the screwdriver tip before use.

      Note

      Do not damage the surface of the oil seal press fit hole or the crankshaft.