ALIGNMENT / HANDLING DIAGNOSIS SERVICE DATA

Vehicle Height (Unloaded Vehicle)
Model	Front A- B	Rear C - D
2WD	116.4 mm (4.582 in.)	33.9 mm (1.335 in.)
AWD	116.9 mm (4.602 in.)	30.8 mm (1.213 in.)

Measurement points:

A: Ground clearance of front wheel center

B: Ground clearance of No. 2 lower suspension arm bushing set bolt center

C: Ground clearance of rear wheel center

D: Ground clearance of strut rod set bolt center

Camber (Unloaded Vehicle)
-	Model	Camber Inclination	Right-left Difference
Front	2WD	-0°35' +/- 45' (-0.58° +/- 0.75°)	45' (0.75°) or less
Front	AWD	-0°36' +/- 45' (-0.60° +/- 0.75°)
Rear	2WD	-1°13' +/- 45' (-1.22° +/- 0.75°)
Rear	AWD	-0°47' +/- 45' (-0.78° +/- 0.75°)

Caster (Unloaded Vehicle)
-	Model	Caster Inclination	Right-left Difference
Front	2WD	2°39' +/- 45' (2.65° +/- 0.75°)	45' (0.75°) or less
Front	AWD	2°41' +/- 45' (2.68° +/- 0.75°)	45' (0.75°) or less

Steering Axis Inclination (Unloaded Vehicle)
-	Model	Steering Axis Inclination
Front	2WD	10°42' (10.70°)
Front	AWD	10°42' (10.70°)

Toe-in
-	Model	Specified Condition	Right-left Difference
Front	2WD AWD	C + D: 0°05' +/- 12' (0.08° +/- 0.2°)	-
Front	2WD AWD	B - A: 1.1 +/- 2 mm (0.0433 +/- 0.0787 in.)	-
Rear	2WD	C + D: 0°17' +/- 0°10' (0.28° +/- 0.16°)	30' (0.50°) or less
	2WD	B - A: 3.8 +/- 2.0 mm (0.150 +/- 0.0787 in.)	-
	AWD	C + D: 0°16' +/- 0°10' (0.27° +/- 0.16°)	30' (0.50°) or less
	AWD	B - A: 3.6 +/- 2.0 mm (0.142 +/- 0.0787 in.)	-

Wheel Turning Angle (Unloaded Vehicle)
-	Model	Inside Wheel	Outside Wheel Reference
Front	2WD	35°12' +/- 2° (35.20° +/- 2°)	31°24' (31.40°)
Front	AWD	35°12' +/- 2° (35.20° +/- 2°)	31°24' (31.40°)