REPAIR INSTRUCTION INITIALIZATION


  1. PROCEDURES NECESSARY WHEN BATTERY TERMINAL IS DISCONNECTED/RECONNECTED

    Necessary Procedure Effect / Inoperative Function When Necessary Procedures are not Performed See Page
    Reset back door close position

    • Back door closer function

    • Power back door function

    Click here for Back door closer system

    Click here for Power back door system

    Note

    After the ignition switch is turned off, the navigation receiver assembly records various types of memory and settings. As a result, after turning the ignition switch off, make sure to wait at least 60 seconds before disconnecting the cable from the negative (-) battery terminal (for Navigation Receiver Type).

  2. PROCEDURES NECESSARY WHEN ECU OR OTHER PARTS ARE REPLACED

    Replacement Part Necessary Procedure Effect / Inoperative Function when Necessary Procedures are not Performed Note
    Automatic transaxle assembly

    1. Reset memory

    2. Transaxle compensation code Input

    3. Perform road test to allow TCM to Learn

    • Large shift shock

    • The deterioration of fuel efficiency

    Click here for U760F Initialization

    Click here for U760F Registration

    Click here for U760E Initialization

    Click here for U760E Registration

    • Valve body assembly

    • Shift solenoid valve SL3 and/or SL4

    1. Reset memory

    2. Reset transaxle compensation code

    3. Perform road test to allow TCM to learn

    • Large shift shock

    • The deterioration of fuel efficiency
    Shift solenoid valve SL1 and/or SL2 Perform road test to allow TCM to learn

    • Large shift shock

    • The deterioration of fuel efficiency
    TCM (If possible, read the transaxle compensation code from the previous TCM) Possible

    1. Reset memory

    2. Transaxle compensation code input (Into the new TCM)

    3. Perform road test to allow TCM to learn

    • Large shift shock

    • The deterioration of fuel efficiency
    Impossible

    1. Reset memory

    2. Reset transaxle compensation code

    3. Perform road test to allow TCM to learn

    • Large shift shock

    • The deterioration of fuel efficiency
    Brake actuator assembly (Skid control ECU) Engine variant learning

    • Slip indicator light illumination

    • VSC disabled or malfunctioning

    • ABS warning light illumination

    Click here

    Power steering ECU Rotation angle sensor initialization and torque sensor zero point calibration

    • P/S warning light comes on

    • EPS control

    Click here

    Steering column assembly Rotation angle sensor initialization and torque sensor zero point calibration Steering effort is different between turning steering wheel to left and right
    Navigation receiver assembly Vehicle contract setting

    • G-BOOK service

    • Emergency call service

    Click here

    ECM ECU communication ID registration (Engine immobiliser system) Engine start See the Service Bulletin for the registration method.

    • Certification ECU (smart key ECU assembly)*1

    • Steering lock ECU (steering lock actuator assembly)*1

    • Key*1

    		 Code registration (Engine immobiliser system (w/ smart entry and start system))

    • Wireless door lock control system

    • Smart entry and start system

    • Engine start

    • Steering lock system

    		 See the Service Bulletin for the registration method.
    Transponder key ECU*2

    1. Key code registration

    2. ECU communication ID registration

    		 Engine start See the Service Bulletin for the registration method.

    • Door control transmitter*2

    • Door control receiver*2

    		 Registration of recognition code (Wireless door lock control system (w/o smart entry and start system)) Wireless door lock control system

    Click here


    • Occupant classification ECU

    • Front passenger seat

    1. Zero point calibration (Occupant classification system)

    2. Sensitivity check (Occupant classification system)

    • Occupant classification system

    • Passenger airbag ON/OFF indicator

    • Airbag system (Front passenger side)

    • Seat belt warning system (Front passenger side)

    Click here


    • Power window regulator motor

    • Door window regulator

    		 Initialize power window control system

    • Automatic door glass open/ close function

    • Jam protection function

    • Operation function after ignition switch is turned off

    • Remote control function

    Click here


    • Sliding roof ECU (sliding roof drive gear assembly)

    • Sliding roof glass

    • Sliding roof housing

    		 Initializing sliding roof ECU (pulse sensor initial position setting)

    • Automatic slide open, tilt up function of sliding roof

    • Jam protection function

    Click here


    • Headlight leveling ECU

    • Rear height control sensor sub-assembly RH

    		 Perform headlight leveling ECU initialization Headlight leveling function

    Click here


    • *1: w/ Smart Entry and Start System

    • *2: w/o Smart Entry and Start System