CAMSHAFT OIL CONTROL VALVE REMOVAL


  1. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY


    1. A01EK9G

      Lift the rear of the No. 1 engine cover sub-assembly to detach the cover from the 2 pins, and then lift the front of the No. 1 engine cover sub-assembly to detach the cover from the pin and remove the No. 1 engine cover sub-assembly.

      Note

      Attempting to disengage both front and rear clips at the same time may cause the No. 1 engine cover sub-assembly to break.

  2. REMOVE CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Exhaust Side)


    1. A01EKZV

      Disconnect the oil control valve connector.

    2. Remove the bolt and oil control valve.

    3. A01EMPGE06
      Text in Illustration
      *1 O-ring

      Remove the O-ring from the oil control valve.

  3. REMOVE CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Intake Side)


    1. A01EIXE

      Disconnect the oil control valve connector.

    2. Remove the bolt and oil control valve.

    3. A01EMPGE06
      Text in Illustration
      *1 O-ring

      Remove the O-ring from the oil control valve.