Click here

МАСЛО И МАСЛЯНЫЙ ФИЛЬТР ЗАМЕНА

Click here
Click here Click here
CAUTION:

  • Prolonged and repeated contact with engine oil will result in the removal of natural oils from the skin, leading to dryness, irritation and dermatitis. In addition, used engine oil contains potentially harmful contaminants which may cause skin cancer.

  • Precautions should be taken when replacing engine oil to minimize the risk of your skin making contact with used engine oil. Protective clothing and gloves that cannot be penetrated by oil should be worn. The skin should be washed with soap and water, or use waterless hand cleaner, to remove any used engine oil thoroughly. Do not use gasoline, thinners, or solvents.

  • In order to protect the environment, used oil and used oil filters must be disposed of at designated disposal sites.

Click here
  1. Click here

    DRAIN ENGINE OIL


    1. A01GISB

      Open the oil filler cap service hole cover.

    2. Remove the oil filler cap.

    3. Remove the oil pan drain plug and drain the engine oil into a container.

    4. Install a new gasket and the oil pan drain plug.

      40 N*m 408 kgf*cm 30 ft.*lbf
  2. Click here

    REMOVE OIL FILTER ELEMENT SERVICE HOLE COVER


    1. A01GJT2

      Remove the screw.

    2. Open the service hole cover.

  3. Click here

    REMOVE OIL FILTER ELEMENT


    1. A01GJULE11

      Connect a hose with an inside diameter of 15 mm (0.591 in.) to the pipe.

      Table 1. Text in Illustration
      *1 Pipe
      *2 Hose
    2. A01GKIK

      Remove the oil filter drain plug.

    3. A01GM41E02

      Install the pipe to the oil filter cap.

      Table 2. Text in Illustration
      *1 Oil Filter Cap
      *2 Valve
      *3 Pipe
      *4 O-Ring
      *5 Hose
      Note:

      If the O-ring is removed with the drain plug, install the O-ring together with the pipe.

      Tip:

      Use a container to catch the draining oil.

    4. A01GNWA

      Check that oil is drained from the oil filter. Then disconnect the pipe and remove the O-ring as shown in the illustration.

    5. A01GII4E02

      Using SST, remove the oil filter cap.

      09228-06501
      Table 3. Text in Illustration
      *1 Oil Filter Bracket Clip
      Note:

      Do not remove the oil filter bracket clip.

    6. A01GMCZE03

      Remove the oil filter element and O-ring from the oil filter cap.

      Table 4. Text in Illustration
      *1 O-Ring
      Note:

      Be sure to remove the O-ring (for the cap) by hand, without using any tools, to prevent damage to the groove for the O-ring on the cap.

  4. Click here

    INSTALL OIL FILTER ELEMENT


    1. Clean the inside of the oil filter cap, the threads and O-ring groove.

    2. A01GMZAE01

      Apply a small amount of engine oil to a new O-ring for the cap, and then install the O-ring to the groove of the oil filter cap.

      Table 5. Text in Illustration
      *1 O-Ring
      *a CORRECT
      *b INCORRECT
      Note:

      • Be sure to install the O-ring in the proper location, otherwise oil may leak.

      • Do not twist the O-ring.

    3. Set a new oil filter element to the oil filter cap.

    4. Remove any dirt or foreign matter from the installation surface of the engine.

    5. Apply a small amount of engine oil to the O-ring again and temporarily install the oil filter cap.

      Note:

      Do not pinch the O-ring for the cap.

    6. A01GJKHE01

      Using SST, tighten the oil filter cap.

      09228-06501
      25 N*m 255 kgf*cm 18 ft.*lbf
      Table 6. Text in Illustration
      *1 Oil Filter Bracket
      *2 Oil Filter Cap
      *3 O-Ring
      *4 Oil Filter Bracket
      *a No Clearance
      Note:

      • When tightening the oil filter cap, do not remove the oil filter bracket clip.

      • Make sure that the oil filter is installed securely as shown in the illustration.

      • Be careful that the O-ring does not get caught between the parts.

    7. A01GJGRE02

      Apply a small amount of engine oil to a new drain plug O-ring, and install it to the oil filter cap.

      Table 7. Text in Illustration
      *1 O-Ring
      Note:

      Before installing the O-ring, remove any dirt or foreign matter from the installation surface of the oil filter cap.

    8. Install the oil filter drain plug.

      13 N*m 133 kgf*cm 10 ft.*lbf
      Note:

      Be careful that the O-ring does not get caught between the parts.

  5. Click here

    ADD ENGINE OIL


    1. Add fresh oil.

      Standard engine oil
      Oil grade Oil Viscosity (SAE)
      API grade SL "energy-conserving", SM "energy-conserving", SN "resource-conserving" or ILSAC multigrade engine oil

      0W-20

      5W-20

      5W-30

      10W-30
      API grade SL, SM or SN multigrade engine oil

      15W-40

      20W-50
      Standard capacity
      Item Specified Condition
      Drain and refill without oil filter change 8.4 liters (8.9 US qts, 7.4 Imp. qts)
      Drain and refill with oil filter change 8.6 liters (9.1 US qts, 7.6 Imp. qts)
      Dry fill 10.2 liters (10.8 US qts, 9.0 Imp. qts)

    2. Install the oil filler cap.

    3. Close the oil filler cap service hole cover.

  6. Click here

    INSPECT FOR ENGINE OIL LEAK


    1. Start the engine. Make sure that there are no oil leaks from the area that was worked on.

  7. Click here

    CHECK ENGINE OIL LEVEL


    1. Warm up the engine, stop the engine and wait 5 minutes. The oil level should be between the dipstick's low level mark and full level mark.

      If low, check for leakage and add oil up to the full level mark.

      Note:

      Do not fill engine oil above the full level mark.

      Tip:

      A certain amount of engine oil will be consumed while driving. In the following situations, oil consumption may increase, and engine oil may need to be refilled in between oil maintenance intervals.


      • When the engine is new, for example directly after purchasing the vehicle or after replacing the engine.

      • If low quality oil or oil of an inappropriate viscosity is used.

      • When driving at high engine speed or with a heavy load, (when towing, or), when driving while accelerating or decelerating frequently.

      • When leaving the idling for a long time, or when driving frequently through heavy traffic.

      When judging the amount of oil consumption, keep in mind that the oil may have become diluted, making it difficult to judge the true level accurately.

  8. Click here

    INSTALL OIL FILTER ELEMENT SERVICE HOLE COVER


    1. Install the service hole cover with the screw.